Palm PDA CentroTM Smart Device Cell Phone User Manual


 
SETTING UP
CHARGING THE BATTERY
20
2
CHAPTER
green) to give it a full charge. See
Maximizing battery life
for tips on
maximizing the life of your Centro battery.
1 Plug the AC charger into a wall outlet.
2 Connect the charger cable to the
bottom of your Centro. Make sure the
arrow on the connector is facing up,
toward the screen.
3 To confirm that your Centro is being
charged, check the indicator light on
your Centro.
Solid red indicates that your Centro is
being charged.
Solid green indicates that your Centro
is fully charged.
TIP
To avoid draining the battery, charge your
Centro every day, especially if you use your
phone often.
DID
YOU
KNOW
?
If your battery ever becomes
fully drained, your info is still stored safely on
your Centro until you connect it to a power
source and charge the battery.
DID
YOU
KNOW
?
You can also trickle-charge
your Centro without the AC charger by
connecting it to your computer with the sync
cable. Trickle-charging takes longer, however.
Be sure to plug your computer into a power
source, or your Centro could drain the
computer’s battery. For the quickest charge
time, use the AC charger.
When trickle-charging your Centro with the
sync cable, the indicator light may not turn on.
To make sure the battery is being charged,
check the onscreen battery indicator.
Indicator light