Filter
Top Products
2A. Device Basics 17
Device Basics
Opening and Closing the Device
Your device features dual touchscreens and allows you
to work on two displays at the same time. The lower
display is located beneath the upper display and is
accessed by sliding it open. With both screens open,
you can extend one application across two screens
(Tablet mode) or use them as separate displays in
Simul-Task or Optimized mode. See “Your Device’s
Screen Modes” on page 26 for details.
To open the device:
ᮣ Using both hands, slowly slide the upper display in
the direction of the arrow until it locks in tilt position.
To make a flat display screen:
1. As you slide the device open, slide the upper
(right) display right until it lies flat.
2. Close the gap between the two displays by
pushing inward until you hear a click.
To close the device:
1. Grasp the right edge of the upper (right) display
and pull it slightly to the right to release the lock.
2. Slide the upper (right) display back to its original
position as shown in the second figure below.
Note: When opening the device, make sure you are sliding in
the correct direction.