Setting Global Properties for an Object Type
Chapter 5 Managing Object Properties 139
5 (optional) In Notifications, specify whether you want notifications to be sent when
threshold crossings are detected:
■ To send notifications to e-mail addresses, select E-mail.
■ To send notifications as traps to SNMP devices, select SNMP.
■ To use the same type of notifications for objects that are subordinate to the
selected ones, click
Apply Notifications on The Object and All Sub Objects.
6 (optional) In Other Properties, select the check boxes for the properties that you want
to use:
■ Show Objects: displays the subordinate objects in the navigation tree
■ Enable Polling: periodically collects the object counters
7 Click Apply Changes.
The Information box displays any error messages that occur after you apply changes.
To Set Global Properties for Virtual Servers
1 In the Device Configuration portion of the navigation tree, click Global Properties.
The Global Properties object-type selection screen is displayed, as shown in
Figure 46 on page 111.
2 Select Virtual Server and click OK.
