Filter
Top Products
Chapter 5 169
CDMA Measurements - Screens and Control Fields
Control Fields for CDMA Measurements
field on the CODE DOMAIN ANALYZER screen.
• Ampl Mid qualifies a trigger each time the input to the CDMA
analyzer rises above −12 ADC FS.
• Ampl Hi qualifies a trigger each time the input to the CDMA
analyzer rises above − 6 ADC FS.
• External must be selected if the trigger qualifier is provided by an
external source. The external signal connects to the TRIGGER
QUALIFIER IN connector. A qualifier occurs on the input signal’s
rising edge.
Screens on which this field is present
CDMA ANALYZER
CODE DOM (Code Domain Analyzer): trigger controls menu
Rate RC-3
This field appears only in IS-2000 Code Domain measurements. The
field displays the data rate of the currently selected channel in terms of
an RC3 radio configuration.
Screens on which this field is present
CODE DOM (Code Domain Analyzer, IS-2000 only)
Rate RC-4
This field appears only in IS-2000 Code Domain measurements. The
field displays the data rate of the currently selected channel in terms of
an RC4 radio configuration.
Screens on which this field is present
CODE DOM (Code Domain Analyzer, IS-2000 only)
Rate RC-5
This field appears only in IS-2000 Code Domain measurements. The
field displays the data rate of the currently selected channel in terms of
an RC5 radio configuration.
Screens on which this field is present
CODE DOM (Code Domain Analyzer, IS-2000 only)