Filter
Top Products
Chapter 6 197
Analog Measurements - Screens and Control Fields
Control Fields for Analog Measurements
Freq (Delta Mrkr)
Marker frequency (Delta Mrkr Freq) displays the difference between
the frequency at delta marker and the frequency at the reference
marker on the spectrum analyzer. This measurement is displayed when
the Norm/Delta field on the Marker controls menu is set to Delta.
See “Using the Spectrum Analyzer’s Delta Markers” on page 113 for
more information on the spectrum analyzer’s delta marker.
Screens on which this field is displayed
SPEC ANL: all menus (when marker controls is set to Delta) except
mask controls
Figure 6-1 Delta and Reference Marker Frequency (Freq) and
Level (Lvl) Display Fields
Freq (mask)
This field sets the frequency of the point on the spectrum analyzer
mask selected in the EditPt field.
See “Using the Spectrum Analyzer Mask” on page 115 for more
information about the spectrum analyzer mask.
Screens on which this field is displayed
SPEC ANL: mask controls menu
Reference Marker
Frequency and
Level
Delta Marker
Frequency and
Level