Filter
Top Products
Getting Started
Changing the Test Set’s Display
Chapter 2
44
Changing the Control Fields
There are several types of control fields in the Test Set. This section describes some of
the different types of fields.
Unit-of-Measure Field
Unit-of-measure can be changed to display measurements in different values or
magnitudes. The unit-of-measure field can also be used to turn a measurement on or off
(use the
On/Off Yes
key).
Figure 2-2 Unit-of-Measure Field
To change a unit-of-measure field
Step 1.
Position the cursor at the unit field on the display.
Step 2.
Press a key labeled with a different unit-of-measure
(such as W).
If the new units are valid, the measurement value is displayed in the unit.
If the new units are not valid, the message Invalid keystroke. is displayed and the
units are not changed.
Unit-of-Measure