Filter
Top Products
Chapter 7 249
Configuration - Screens and Control Fields
Control Fields on the Configuration Screens
Serial Port
This field selects the serial port. The SERIAL 9 port must be used for
serial printing. SERIAL 11 is reserved for use with special software
that enables remote operation through a PC.
For more information about the serial ports see “SERIAL 9, 10, and 11”
on page 291.
Screen(s) Where Field is Present
I/O CONFIGURE
MODEM CONFIGURE
Status
This field indicates the status of the modem connection.
• Connected
•Idle
•Waiting
• Dialing
• Authenticating
• Disconnecting
Screen(s) Where Field is Present
MODEM CONFIGURE
Stop Length
This field specifies the number of stop bits (1 or 2) used for serial
communications when using the serial port.
This setting is maintained after the instrument is turned off.
Operating Considerations
When in remote mode (Remote Mode field is set to On), this field is
inaccessible.
Screen(s) Where Field is Present
I/O CONFIGURE