Filter
Top Products
236 Chapter 7
C:\Spk\Ref\RefGuideRevE\Cnfgscrn.fm
Configuration - Screens and Control Fields
Control Fields on the Configuration Screens
GPIB Adrs
This field is used to display and change the GPIB address of the Test
Set.
Operating Considerations
The address can be set from 0 to 30 by using the DATA keys, or by
pushing and then turning the cursor-control knob.
This setting is retained when the instrument is turned off.
Screen(s) Where Field is Present
I/O CONFIGURE
Hold-off Delay
This field sets the number of seconds to wait before attempting an
origination. This applies to the delay prior to attempting a dialback as
well as the delay prior to retrying an origination as part of the retry
sequence.
This setting is retained when the instrument is turned off.
Screen(s) Where Field is Present
MODEM CONFIGURE
IBASIC Echo
This field enables/disables screen and error message echoing from
IBASIC.
This setting is retained when the instrument is turned off.
Screen(s) Where Field is Present
I/O CONFIGURE