98 Chapter 4
C:\Spk\Ref\RefGuideRevE\Tools.fm
Overview of the Test Set’s Built-In Tools
Using the RF Tools Program
Making the Measurement
1. Select Cable Fault from the Select Test (Main) Menu. The Cable
Fault Information menu will appear.
Figure 4-16 Selecting the Cable Fault Measurement
2. Position the cursor at Sweep center frequency (MHz) and select.
A Choices menu appears.
• 505 MHz - Use this center frequency for high resolution, short
range cable tests. The cable lengths can range from 10 to 1000 ft.
• 850 MHz - Use this center frequency for cable tests at cellular
frequencies. This should be used for frequency sensitive devices,
such as filters, and has a cable length range of 150 to 1000 ft.
• 1850 MHz - Use this center frequency for cable tests at PCS
frequencies. This should also be used for frequency sensitive
devices and has a cable length range of 150 to 1000 ft.
3. Position the cursor at Cable length and enter the appropriate
value.
Select Main Menu
Cable Fault Measurement