Filter
Top Products
248 Chapter 7
C:\Spk\Ref\RefGuideRevE\Cnfgscrn.fm
Configuration - Screens and Control Fields
Control Fields on the Configuration Screens
Serial Baud
This field selects the baud rate for serial communications when using
the serial ports. Selecting this field displays a list of baud rate choices.
This setting is maintained after the instrument is turned off.
Operating Considerations
When in remote mode (Remote Mode field is set to On), this field is
inaccessible.
Screen(s) Where Field is Present
I/O CONFIUGRE
Serial_9 In
This field selects the destination of characters received by the Test Set
on the SERIAL PORT 9.
• Inst configures the serial port to connect to an external ASCII
terminal or computer to enter IBASIC programs, or to control the
Test Set using an external keyboard.
• IBASIC is used to allow the IBASIC controller to read the serial port
while a program is running.
Operating Considerations
If a serial printer is connected, the PRINT command causes the printer
to take control of the serial port until printing is done.
This setting is maintained after the instrument is turned off.
Screen(s) Where Field is Present
I/O CONFIGURE
Serial No.
This field displays the serial number of the Test Set.
Screen(s) Where Field is Present
INSTRUMENT CONFIGURE