Filter
Top Products
Chapter 3 59
Operating Overview
Displaying Measurement Results on a Meter Scale
Displaying Measurement Results on a Meter
Scale
Figure 3-8 Displaying the Meter Scale
Measurement results can be displayed on a meter scale. The digital
numeric value is still displayed (but smaller) under the meter scale.
To display the meter scale
1. Move the cursor to the unit-of-measure field for the measurement
you want displayed on the meter.
2. Press and release the blue
Shift
key, then the
Incr Set
key to access
the meter function.
3. Select On/Off from the Meters: menu (or press the
On/Off
key).
To set the meter’s end points and scale intervals
1. Use the knob to select the unit-of-measure field for the measurement
you want displayed on the meter.
2. Press and release the blue
Shift
key, then the
Incr Set
key to access
the meter function.
3. Select Hi End, Lo End, or Interval from the Meters: menu and
enter the value for your selection, then press the
Enter
key.
4. Repeat steps 2 and 3 until you have set the desired parameters for
the meter’s scale.
Unit-of -Measure
Fields
Meters:
On/Off
Lo End
Hi End
Intervals