Filter
Top Products
Chapter 4 89
Overview of the Test Set’s Built-In Tools
Using the RF Tools Program
Swept Insertion Loss
Measurement Description
This test measures the loss of a cable or device by sweeping it over the
specified frequency range. This test uses the Spectrum Analyzer to
make measurements.
Making the Measurement
1. Select Swept Insertion Loss from the Select Test (Main) Menu. A
Swept Insertion Loss Information menu will appear.
Figure 4-10 Selecting the Swept Insertion Loss Measurement
2. Position the cursor at Start frequency in MHz and select it. Enter
a value for the start of the frequency sweep from 0.4 MHz to
1000 MHz or 1700 MHz to 2000 MHz.
3. Position the cursor at Stop frequency in MHz and select it. Enter a
value from 0.4 MHz to 1000 MHz or 1700 MHz to 2000 MHz. This
value should be larger than the start frequency.
Swept Insertion Loss
Select Test Menu