Filter
Top Products
Chapter 7 231
Configuration - Screens and Control Fields
Control Fields on the Configuration Screens
Command Escape Character
This field allows you enter a one-character, non-printable escape
character to define your own escape command sequence.
The Decimal Equivalent of the escape character is displayed to the
right of the entry. This character is sent to the modem automatically
when the modem is configured (see “Modem Configuration” on page
238).
This setting is retained when the instrument is turned off.
Screen(s) Where Field is Present
MODEM CONFIGURE
Connection Time-out
This field sets the number of seconds to wait before aborting a
connection attempt. This applies to both answer and originate
activities. This information is sent to the modem automatically when
the modem is configured (see “Modem Configuration” on page 238).
This setting is retained when the instrument is turned off.
Screen(s) Where Field is Present
MODEM CONFIGURE
Data Length
This field specifies the number of bits used for each word of serial data
when using the serial port.
This setting is retained when the instrument is turned off.
Operating Considerations
When in remote mode (Remote Mode field is set to On), this field is
inaccessible.
Screen(s) Where Field is Present
I/O CONFIGURE