Filter
Top Products
64 Chapter 3
C:\Spk\Ref\RefGuideRevE\Opoverv.fm
Operating Overview
Changing the Increment or Decrement Setting
Changing the Increment or Decrement Setting
Specifying An Increment Value for the Arrow Keys or
Knob
The
Incr Set
key is used to assign a specific increment value. The
increment value may use different units than the field you are
incrementing/decrementing. For instance; if the RF generator’s
Amplitude setting is displayed in dB µV, you could increment in units
of dB or mV.
To change the increment/decrement value
Step 1.
Move the cursor to the numeric entry field to be changed.
Step 2.
Press
Incr Set
, and enter the desired incremental value and
unit-of-measure using the DATA ENTRY keys.
Step 3.
Use the down-arrow and up-arrow keys or cursor control
knob to increment the field’s value. The field’s value changes by the
value you set for each key press or knob click.
Using the Factor of 10 Increment/Decrement Keys
The
Incr
× 10 and
Incr ÷
÷÷
÷10
keys change the increment/decrement value
by a factor of 10.
For example, if you set the increment for Tune Freq to 10 MHz for
every click of the knob or push of the down-arrow or up-arrow keys,
pushing
Incr ×
××
× 10
changes the increment value to 100 MHz.