Filter
Top Products
68 2G. Managing Your Device
To edit a profile
1. From the Home panel, scroll to the
Settings item and then press the Enter key (option should be Profile).
2. Select the profile to edit and then press
Menu (right softkey) > Edit.
3. Modify the settings and press
Done (left softkey). To cancel without saving the changes, press Cancel
(right softkey).
Set Personal Information
Entering and displaying owner information are best practices; they allow someone to return the phone to you
in case it is lost.
To enter owner information
1. From the Home panel, press
Start (left softkey) > All Programs (left softkey) > Settings > Owner Information.
2. Enter the necessary information and press Done (left softkey).
Change Power Management Settings
You can use Power Management to check the battery, and configure settings that prolong battery life.
To change power management settings
1. From the Home panel, press
Start (left softkey) > All Programs (left softkey) > Settings > Power Management.
2. Adjust the available settings:
Ⅲ In Backlight brightness, select the backlight brightness.
Ⅲ In Backlight time out on battery/AC and Display time out on battery/AC, set the time when the backlight and
display will turn off when the phone is left idle.
Ⅲ In Adjust keypad backlight by light sensor, select whether to turn it on or off. If this is turned on, the light
sensor senses the dark conditions and activates a backlight under the keypad and keyboard.
Ⅲ In When device is turned on, do not charge the battery when connected to the PC, select Off if you want to charge
the phone battery when the phone is connected to the computer through USB.
3. Press
Done (left softkey).
Phone Services
Additional phone service options can be easily configured on your phone.
To access and change settings of phone services:
1. From the Home panel, press
Start (left softkey) > All Programs (left softkey) > Settings > Phone.
2. Select the service you want to use, and then press the
Enter key.
3. Choose your desired options, and then press
Done (left softkey).
Tip
To revert to the default profile settings, press Menu (right softkey) > Reset to default.
Tip
Main battery indicates the amount of battery life remaining.