Filter
Top Products
266 Section 6A: Managing Files
Synchronizing Over a Bluetooth Connection
1. Press Applications and select HotSync .
2. Select Local.
3. Select the pick list below the HotSync icon, and then select
the name of the PC you set up for Bluetooth synchronization
(see “Setting Up a Bluetooth Connection for Synchronization”
on page 265).
4. Select the HotSync icon on your device.
When synchronization is complete, a message appears at the top of your device screen. Be
patient; synchronization may take a few minutes.
Synchronizing Over an Infrared Connection
When you synchronize using your device’s IR port, you don’t need your cable. This is
especially useful if you travel with an IR-enabled laptop.
To synchronize over an infrared connection, you must first do the following:
ⅷ Turn on your computer’s built-in IR port or external IR device. Check your computer’s
documentation to see if the computer supports IR communication and to find out how
to enable this feature.
ⅷ Make sure HotSync manager is active. On a Windows computer, you know HotSync
manager is active when its icon appears in the lower-right corner of your screen.