Filter
Top Products
Changing Your Settings 141
Manually Adding a Wi-Fi Network
1. Press and then tap (
Settings
)
Wireless and networks
Wi-Fi settings
.
2. Tap
Wi-Fi
to turn it on (indicated by green check mark).
3. Tap
Add Wi-Fi network
.
4. Enter the SSID (Service Set Identifier) and Security settings
then tap
Save
.
Note:
An SSID is a unique key which identifies a wireless LAN. Its purpose is
to stop other wireless equipment from accessing your LAN — whether
accidentally or intentionally. To communicate, wireless devices must be
configured with the same SSID.
Bluetooth settings
In this menu you can activate Bluetooth, view or assign a device
name, activate your phone so other Bluetooth devices can
discover it, or scan for other, available Bluetooth devices with
which to pair.
Activating Bluetooth
ᮣ
Press and then tap (
Settings
)
Wireless and networks
Bluetooth settings
and tap
Bluetooth
to turn it on.
Note:
Bluetooth must be enabled prior to use.
Changing the Device Name
1. Activate Bluetooth.
2. Press and then tap (
Settings
)
Wireless and networks
Bluetooth settings
Device
name
. The assigned device name displays.
3. Press to erase the current device name and enter a
new name for this device using the keyboard.
4. Tap
OK
to confirm your setting.
Activating Visibility
ᮣ
Press and then tap (
Settings
)
Wireless and networks
Bluetooth settings
Visible
.
The phone is now activated for discovery for 119 seconds
so you can pair with another device. After 119 seconds the
phone becomes undiscoverable again.