Filter
Top Products
28 Getting Started
1.3 Starting Up
After installing your SIM card and battery and charging the PDA phone, you
can now power on and start using your device.
Turn your device on and off
To turn on the power
• Press and hold the POWER button for a few seconds.
When you turn on your device for the first time, a Quick Start Wizard
guides you through the calibration process and the setup of date
and time, and password. For more information about touch screen
calibration, see “Calibrate the device” later in this chapter. After the Quick
Start Wizard finishes, the device installs customization settings, then
restarts.
Note After the device restarts, you may be prompted to set up an e-mail
account. Refer to Chapter 7 for details.
To turn off the power
• Press and hold the POWER button for a few seconds.
Tap Yes when a message prompts you to choose whether or not to turn
off the device completely.
Calibrate the device
Calibrating the touch screen involves tapping the center of a cross with the
stylus as the cross moves around the screen. This process ensures that when
you tap the screen with your stylus, the tapped item is activated.
If your device does not accurately respond to screen taps, follow these steps
to re-calibrate it:
1. Tap Start > Settings > System tab > Screen.
2. On the General tab, tap Align Screen and follow the on-screen
instructions to complete the calibration.
Manage screen settings
The device’s display supports two orientation modes: Portrait and
Landscape. Do one of the following to change the screen orientation: