Filter
Top Products
CHAPTER 3 NDA-24300
Page 98
Issue 1
SYSTEM MESSAGES
➇
Tested Route No.
Note:
When Logical Routes are assigned, Logical Route Numbers are displayed here.
➈
OPRT data
Note:
When Logical Routes are assigned, Logical Route Numbers are displayed here.
➉
(This data is not for Ringing Signal
Test)
Digit of Dialed Number (for test
)
Dialed Number (for test)
(a) Dialed Number sent by the test Trunk/Sender
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b4-b7 b0-b3 b4-b7 b0-b3
dc0 dc1 dc12 dc13
dc2 dc3 dc14 dc15
dc4 dc5 dc16 dc17
dc6 dc7 dc18 dc19
dc8 dc9 dc20 dc21
dc10 dc11
b0-b5: Route No. (1-63) Note
b6: OP
0/1 = Data in OPRT (
➈
) is invalid/valid
b7: AC
0/1 = Internal trunk/External trunk
b0-b7: Route No. (
64) Note
>
b0-b7: Trunk No. for Outgoing trunk test, ORT/IRT Test, Sender Test and
Digital Conference test
Tone Slot No. for Tone Test
0 = DT 1 = SPDT
2 = RBT 3 = CRBT, CWT
4 = BT 5 = RBT
6 = SST, WT 7 = SDT
8 = TRG 9 = SDTT
10 = CWRBT 14 = MSC
b0-b4: Dialed number digit sent by the test Trunk/Sender
or
Dialed Number digit received by the test Register
11
12
(b) Dial Number received by the test Register
b4-b7 b0-b3
dc0 dc1
dc2 dc3
dc4 dc5
dc6 dc7
dc8 dc9
dc10 dc11