Filter
Top Products
NDA-24300 CHAPTER 8
Page 529
Issue 1
CADSD: Continuous Assignment of Station Data
When Delete is selected in the Type selection list box
Input Data
TN(START): First Tenant Number
TN(END): Last Tenant Number
STN(START): First Station Number [Max. 6 digits]
STN(END): Last Station Number [Max. 6 digits]
STEP: Station Count-up Step
Note 1
If using * and # → [1-12]
If not using * and # → [1-10]
Note 1:
In this parameter, specify the size of increment between the consecutive station numbers to be deleted.
See the example below:
Example: Input data Result
STN(START)=100
STN(END)=200
STEP=10
Buttons
Execute: Click to delete the input data.
Cancel: Click to cancel the deletion.
Exit: Click to exit this command.
Display Data
TN: Tenant Number
STN: Station Number
STATUS: Result of Deletion
Note 2
Note 2:
When the deletion is successful, OK is displayed here. Otherwise (i.e. the deletion is rejected), related
error message is displayed.
→
Station Number is deleted by 10 increments:
∇ When * and # are not used as part of STN
100 110 120 130 ... 190 200
∇ When * and # are used as part of STN
10* 118 126 134 ... 1** 1#8