Filter
Top Products
NDA-24300 CHAPTER 6
Page 399
Issue 1
SYSTEM OPERATIONS
Figure 6-11 Line Load Control Indication (DESKCON)
(3) Operations on the MAT
By entering ALLC command from the MAT, Line Load Control executes. The station to be controlled and
the contents of the Line Load Control executed on the MAT are the same as those in Step (1), Operations
on the Attendant Console.
(4) Automatic Setting
If the usage rate of the CPU exceeds the system data usage rate, Line Load Control is automatically set.
In this case, system message [6-C] displays. The station to be controlled and the contents of the Automatic
Line Load Control are the same as those in Step (1), Operations on the Attendant Console.
If the usage rate of the CPU drops below the system data usage rate, the Line Load Control is automati-
cally cancelled. In this case, system message [6-D] displays. While the Line Load Control is set, the lamps
on the control panel of the Desk/Attendant Console remain lit.
COMMAND COMMAND FULL NAME
ALLC Assignment of Line Load Control
1
4
7
*
2
5
8
0
3
6
9
#
Line Load indication
LLC is displayed on a Desk Console, when Line Load Control starts.
LLC
Desk Console
L1
L2
L3
L4
L5
L6