Filter
Top Products
NDA-24300 CHAPTER 6
Page 439
Issue 1
SYSTEM OPERATIONS
10.1 Designated Connection Test (Station)
(1) General
The purpose of this test is to confirm the operations related to a trunk or tone that is designated from the
test station. Refer to Table 6-6. The test result displays on the MAT screen as system message [6-I].
(2) Precaution
Designated connection to a trunk—A designated connection to trunk is limited only to an individual line
of either 2nd DT system or sender system.
Table 6-6 Designated Connection Test (Station) Operations
ITEM TEST ITEM CONTENT OF CONFIRMATION REMARKS
1 Register (ORT/IRT) Whether the dialed numbers (1, 2, 3, 4, 5, 6, 7, 8, 9, 0, *, #) can be
received correctly is to be confirmed.
2 Sender Whether the numbers (1, 2, 3, 4, 5, 6, 7, 8, 9, 0, *, #) can all be sent out
is to be confirmed.
3 3-Party Conference
Trunk
By connecting the test tone to each port of a 3-Party Conference Trunk,
whether the test tone can be heard is to be confirmed.
4 Tone Various kinds of tone are to be confirmed.
5 Interrupted Ringing
(IR)
Interrupt ringing (IR) is to be confirmed.
6 Trunk Connections of trunks are to be confirmed.