NDA-24300 CHAPTER 3
Page 67
Issue 1
SYSTEM MESSAGES
This message displays when a data sending error or no answer error occurs at the time of data transfer from
CPU to DLKC card.
➀
System status of faulty DLKC card
➁
Error Code
➂
Details on Switching Network
Note:
This data displays when the STBY DLKC card is detected as faulty.
1: XXXX XX00 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁ ➂
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b1 b0
Default Alarm:
SUP
1-V
DLKC Data Transfer Failure (Temporary)
Default Grade:
1
Grade Modified: Lamp Modified:
b0: 0/1 = No. 0 system / No. 1 system
01H: Firmware fault
02H: Data transfer time out to DLKC
03H: No answer time out (at DLKC)
04H: Data parity error
b0: Status of Speech Path System (including DLKC)
0/1 = No. 0 system is ACT/No. 1 system is ACT
b1: Status of basic clock
0/1 = No. 0 system is ACT/No. 1 system is ACT
b7: Information on Reset of STBY DLKC Note
0/1 = - /STBY DLKC card was reset