Filter
Top Products
CHAPTER 8 NDA-24300
Page 524
Issue 1
ATRF: Assignment of Traffic Measurement Order
ATRF:
Assignment of Traffic Measurement Order
1. Functional Outline
This command is used to assign and delete traffic measurement programs. A request for traffic measurement
is performed when a traffic measurement instruction has been assigned by this command. The collected traffic
measurement data can be stored on the HD of the MAT, which can be designated on the basis of traffic
measurement type.
2. Parameters
Input Data
TYPE: Type of Traffic Measurement (1-19) (See Table 8-2.)
PORT: Traffic Information Output Terminal Number (0-7:IOC, 8:LAN, 9:NMS)
INTERVAL: Output interval (0, 30-120)
Assign the data (30-120) in 10 minute increments. When assigning 0 (available
when any of TYPE 3-18 is selected), instead specify your desired output time in
the “OUTPUT HOUR/MINUTE” parameters below.
START HOUR
Note 1
START MINUTE
Note 1
END HOUR
Note 1
END MINUTE
Note 1
OUTPUT HOUR: This data is valid only when INTERVAL=0.
OUTPUT MINUTE: This data is valid only when INTERVAL= 0.
START RT: Start External Route Number (available when TYPE 2/5/8 is selected)
END RT: End External Route Number (available when TYPE 2/5/8 is selected)
START C_RT: Start Connection Route Number (available when TYPE 18/19 is selected)
END C_RT: End Connection Route Number (available when TYPE 18/19 is selected)
Note 1:
Assign the traffic measurement time period between START HOUR/MINUTE and END HOUR/
MINUTE longer than an hour. Also, if the measurement should be executed throughout a day, assign
the same data in both START HOUR/MINUTE and END HOUR/MINUTE parameters.
Note 2:
Traffic Type 15 only works on Ring Down Trunks.
Table 8-2 Type of Traffic Measurement Explanation
DATA MEANING DATA MEANING
1 Terminal Traffic 2 Route Traffic
3 Station Peg Count 4 ATT Peg Count
5 Route Peg Count 6 Service Peg Count
8 UCD Route Peg Count 9 UCD Group Peg Count
10 UCD Station Peg Count 15 ATT Answering Peg Count
18 Connection Route Peg Count 19 Connection Route Traffic