Filter
Top Products
NDA-24300 CHAPTER 3
Page 227
Issue 1
SYSTEM MESSAGES
[When =05 (OAI) / 07 (MIS) ]
➉ Faulty Logical Port No. (Hex)
Error Kind (ERRK)
~ Not used
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
Table 3-3 Error Kind (ERRK)
Output Data Error Situation Required Check
01H SEND Execution Error
TCP/IP connection is down because the text is not transmit-
ted continuously.
[1] Check the TCP/IP Transmission
capacity on the UAP side is proper
or not.
[2] Check the operation status on the UAP
side is normal.
02H RECEIVE Execution Error
Incorrect text format is received.
[1] Check the software operation on the
MIS or Host side.
[2] Check the LAN cable connection
status.
03H TCP/IP Connection Error
TCP/IP connection is released due to the TCP port discon-
nection order from the MIS or Host.
Re-start the MIS or HOST computer.
04H Connection Error (B-level Infinite Loop, etc.)
TCP port is released due to the detection of abnormal state in
the MIS or HOST operation.
Re-check the operation status of MIS or
Host.
05H TCP/IP Port Capacity Over
TCP/IP connection cannot be established due to the connec-
tion port capacity over.
The number of allowed ports for applica-
tion use via TCP/IP must be 16 or less. Ad-
just the used application number not to
exceed “16” in total.
9
11
b0-b7 : Error Kind (Hex)
Refer to Table 3-3:
12 24