Filter
Top Products
NDA-24300 CHAPTER 3
Page 49
Issue 1
SYSTEM MESSAGES
This message displays when a B-level infinite loop failure occurs.
➀
Information on Self-CPU Restart
after detection of a clock fault
➁
Mate-CPU Restart Information
➂
B-level Infinite Loop
➃
Data Analyzed by NEC Engineers
Reference: See Chapter 5, Section 6.2, for the repair procedure.
0-F Memory Failure
1: XXXX XXXX XXXX XXXX 2: XXXX XXXX XXXX XXXX 3: XXXX XXXX XXXX XXXX
➀
➁➂
➃
4: XXXX XXXX XXXX XXXX 5: XXXX XXXX XXXX XXXX 6: XXXX XXXX XXXX XXXX
➃
7: XXXX XXXX XXXX XXXX 8: XX00 0000 0000 0000 9: 0000 0000 0000 0000
➃
b7 b5 b4 b3 b0
b7 b5 b4 b3 b0
b7 b1 b0
Default Alarm:
MN
0-G
B1-Level Infinite Loop (Permanent)
Default Grade:
2
Grade Modified: Lamp Modified:
b0: 0/1 = -/Monitor Restart
b3: 0/1 = -/Initialization
b4: 0/1 = -/Data Copy restart (for Dual-CPU system only)
b5: 0/1 = -/MB control
b7: 0/1 = ACT/STBY (active system indication after restart)
b0: 0/1 = -/Monitor Restart
b3: 0/1 = -/Initialization
b4: 0/1 = -/Data Copy Restart (for Dual-CPU system only)
b5: 0/1 = -/MBcontrol
b7: 0/1 = ACT/STBY (active system indication after restart)
b0: 0/1 = -/B-level Infinite Loop
b1: 0/1 = -/Task Timer Timeout