Filter
Top Products
CHAPTER 3 NDA-24300
Page 52
Issue 1
SYSTEM MESSAGES
This message displays when the system is interrupting abnormally in the processing.
➀
Self-CPU Restart Information
➁
Mate-CPU Restart Information (FF
H: not mounted)
➂
➃
Data Analyzed by NEC Engineers
Reference: See Chapter 5, Section 6.2 and Section 6.3, for the repair procedure.
1: XXXX XXXX XXXX XXXX 2: XXXX XXXX XXXX XXXX 3: XXXX XXXX XXXX XXXX
➀ ➁ ➂ ➃ ➃ ➃ ➃
4: XXXX XXXX XXXX XXXX 5: XXXX XXXX XXXX XXXX 6: XXXX XXXX XXXX XXXX
➃➃➃
7: XXXX XXXX XXXX XXXX 8: XX00 0000 0000 0000 9: 0000 0000 0000 0000
➃➃
b7 b5 b4 b3 b0
b7 b5 b4 b3 b0
b7 b3 b0
Default Alarm:
SUP
0-J
Abnormal Interrupt
Default Grade:
2
Grade Modified: Lamp Modified:
b0: 0/1 = -/Monitor Restart
b3: 0/1 = -/Initialization
b4: 0/1 = -/Data Copy restart (for Dual-CPU system only)
b5: 0/1 = -/MB control
b7: 0/1 = ACT/STBY (active system indication after restart)
b0: 0/1 = -/Monitor Restart
b3: 0/1 = -/Initialization
b4: 0/1 = -/Data Copy restart (for Dual-CPU system only)
b5: 0/1 = -/MB control
b7: 0/1 = ACT/STBY (active system indication after restart)
b0: 0/1 = -/Abnormal Interruption (Hardware)
b3: 0/1 = -/Program Exception