Filter
Top Products
NDA-24300 CHAPTER 6
Page 393
Issue 1
SYSTEM OPERATIONS
1.4 Variable Alarm Indication
This feature allows PBX users to make a flexible change of system message output grades which range 0
to 3 and alarm lamp grades which consist of MJ, MN, SUP and NONE. Thus, the PBX users can give a
proper alarm grade to each system message according to their requirements. When assigning no data, the
default alarm grades are automatically adopted.
2. COLLECTION OF SYSTEM MESSAGES
System messages are collected in the following ways:
• Automatic printout to the system message dedicated printer
• Automatic printout to the MAT printer
• Printout by DFTD command
2.1 Automatic Printout to System Message Dedicated Printer
Figure 6-4 shows the operating procedure.
Figure 6-4 Automatic Printout to System Message Dedicated Printer Operating Procedure
COMMAND COMMAND FULL NAME
ALMG Assignment of Alarm Grade Data
COMMAND COMMAND FULL NAME
MBSM Make Busy of System Message Printout
Power on to printer.
Automatic
Printout Status
Is printout
stopped
temporarily?
If a message is registered, the contents will
Set printer port to Make-Busy
status using MBSM command.
YES
NO
print out.