Filter
Top Products
CHAPTER 6 NDA-24300
Page 402
Issue 1
SYSTEM OPERATIONS
6.2 Class Change and Number Change of Station and Data Terminal
Figure 6-12 shows the procedure for class change and number change of station and data terminal.
Figure 6-12 Class Change and Number Change of Station and Data Terminal Procedure
6.3 Make-Busy/Make-Busy Cancel of C.O. Line/Tie Line
Figure 6-13 shows the procedure to make-busy/make-busy cancel of C.O. line/tie line.
Figure 6-13 Make-Busy/Make-Busy Cancel of C.O. Line/Tie Line Procedure
Refer to Section 6.1.
• For changing class, use ASCL command
Note 1
• For changing station number, use ASTN command
Note 2
Refer to Section 6.1.
START
Line Make-Busy
Class change and number
change
Line Make-Busy Cancel
END
Note 1:
For guest station of Hotel System, use AGCL command.
Note 2:
For guest station of Hotel System, use AGSN command.
END
• For make-busy/make-busy cancel by line basis MBLE
command
• For make-busy/make-busy cancel by route basis MBRT
command
• For make-busy/make-busy cancel by each circuit card
MBPM commands or MB (toggle) switch setting on the
circuit card
START
Make-Busy/Make-Busy Cancel of
C.O./Tie Line