Filter
Top Products
CHAPTER 8 NDA-24300
Page 530
Issue 1
CARR: Continuous Assignment of Alternative Route Restriction
CARR:
Continuous Assignment of Alternative Route Restriction
1. Functional Outline
This command is used to continuously assign/delete the restriction data of relay connections between the
outgoing route and the incoming route.
2. Parameters
Input Data
TYPE: Assign/Delete
ICRT (START/END): Incoming Route Logical Number (External Route only)
OGRT (START/END): Outgoing Route Number (External Route only)
ARI A-RES: Restriction Data for Alternative Route Index-A [0/1]
Restriction of the trunk-to-trunk (tandem) connection via ATTCON or station
when a C.O./Tie Line call terminates.
0=Alternate routing is restricted.
1=Alternate routing is allowed.
ARI D-RES: Restriction Data for Alternative Route Index-D [0/2]
Restriction of the trunk-to-trunk (tandem) connection by Direct Dial Access
from a station when a C.O./Tie Line call terminates.
0=Alternate routing is restricted.
1=Alternate routing is allowed.
2=Toll Restriction is restricted.
Display Data
ICRT: Incoming Route
OGRT: Outgoing Route
STATUS: OK or error message is displayed.