Filter
Top Products
NDA-24300 CHAPTER 8
Page 625
Issue 1
XHFD: X-RAY HD or FDD Diagnosis
XHFD:
X-RAY HD or FDD Diagnosis
1. Functional Outline
This command is used to execute the following diagnoses.
• Hard Disk Diagnosis
By executing read/write check on the files in the hard disk of the PBX, this command diagnoses the hard
disk for its normality.
If an error has been found as a result of the diagnosis, this command displays the information on the faulty
logical drive and the number of faulty sectors on the MAT screen. The information can also be output by
the printer.
• Floppy Disk Diagnosis
By executing cleaning of the floppy disk drive in the PBX, this command diagnoses the floppy disk drive
for its normality.
If the cleaning has not finished normally, a diagnosis error has been found as a result of the diagnosis. The
result message may be displayed on the MAT screen or printed out by the printer.
2. Parameters
Input Data
FUNCTION: HD/FDD Designation [1/2]
1=Diagnosis of HD (Hard Disk)
2=Diagnosis of FDD (Floppy Disk Drive)
AREA: Area Designation [0/l]
Note
0=All Files
1=Program Files
SYSTEM: System (0/1)
0=No.0 System
1=No.1 System
Note:
“AREA” parameter appears only when “1(=HD)” is selected in the “FUNCTION” parameter.
Buttons
Exe: Click to execute the diagnosis.
Close: Click to exit this command.