Filter
Top Products
CHAPTER 3 NDA-24300
Page 42
Issue 1
SYSTEM MESSAGES
This message displays when the processor is reset due to a failure in the system.
➀
Self-CPU Restart Information
➁
Mate-CPU Restart Information (FF
H: not mounted)
➂
Related-call Release Result
Reference: See Chapter 5, Section 6.2 and Section 6.3, for the repair procedure.
1: XXXX XX00 XXXX 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀➁ ➂ ➃
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b4 b3 b1 b0
b7 b6 b4 b3 b1 b0
b7 b0
Default Alarm:
MN
0-C
Reset Interrupt
Default Grade:
3
Grade Modified: Lamp Modified:
b0: 0/1 = -/Monitor Restart
b1: 0/1 = -Phase 1 Restart Note 1
b3: 0/1 = -/Initialization
b4: 0/1 = -/Data Copy Restart executed (for Dual-CPU system only)
b6: 0/1 = Program Load not executed/executed
b7: 0/1 = ACT/STBY (active system indication after restart)
b0: 0/1 = -/Monitor Restart
b1: 0/1 = -Phase 1 Restart Note 1
b3: 0/1 = -/Initialization
b4: 0/1 = -/Data Copy Restart executed (for Dual-CPU system only)
b6: 0/1 = Program Load not executed/executed
b7: 0/1 = ACT/STBY (active system indication after restart)
b7: 0/1 = Call Release Processing after restart ->“Normal End”/“Abnormal
End”