Filter
Top Products
NDA-24300 CHAPTER 8
Page 563
Issue 1
DSTN: Display of Station Data
DSTN:
Display of Station Data
1. Functional Outline
This command is used to display the registered Station Data corresponding to the designated Tenant and
Station Number. In addition, the information of Hot Line, D
term
Key Layout, Hunting, and Call Pickup, etc,
can also be displayed as the data related to the designated stations.
2. Parameters
Input Data
TN: Tenant Number
STN: Station Number [0-9, #, * (Max. 6 digits)]
Buttons
[For display data selection]
SHP: Station Hunting Group-Pilot
Note
KYD: Key Data for D
term
Note
CPG: Call Pickup Group
Note
CPE: Call Pickup Expand Group
Note
PHN: Phantom Station Number
Note
SHC: Station Hunting-Circular
Note
SHU: Station Hunting-UCD
Note
HLS: Hot Line Station
Note
Note:
When the designated station has any of these data, the corresponding button(s) can be selected. If the
data is necessary, click the button(s).
[For execution order]
Get: Click to view the display data.
Close: Click to exit this command.
Display Data (by Parameters)
ETN: Effective Tenant Number
LENS: Line Equipment Number (6 digits)
TEC: Telephone Equipment Class [1-31]
l=DP (10pps) 2=PB
3=DP/PB 4=DP (20pps)
5-11=Not used 12=D
term
13=Data Terminal via D
term
14=Hot Line
15=CAS Line 16=Data Terminal via Data Module
17=Not used 18=Virtual Line Appearance (for D
term
Multi-Line)
19-22=Not used 23=ISDN Terminal
24-26=Not used 27=8 Conference Equipment
28-31=Not used
RSC: Route Restriction Class [0-15]
SFC: Service Feature Class [0-15]