Filter
Top Products
Using Your Treo 700P Smartphone 216
Using expansion cards
Inserting and removing expansion cards
0
Tip
If the Ringer switch is
set to Sound On, you
hear a confirmation
tone when you insert
or remove an
expansion card.
Tip
When you’re not using
the expansion card,
reinsert the dummy
card to keep the
expansion card slot
clean.
1. Press down and release the dummy card.
2. After you feel the expansion card slot eject the dummy card,
remove the card from the slot.
3. Hold your smartphone with the screen facing you, and hold the
card with the label facing you. The notch on the card should be in
the lower-left corner next to the antenna.
4. Insert the card into the expansion card slot until you feel it lock into
place.
Notch