Palm 700P Cell Phone User Manual


 
Using Your Treo 700P Smartphone 298
Regulatory information
If new information leads FDA to believe that a change to FCC's
measurement policy may be appropriate, FDA will contact FCC
and both agencies will work together to develop a mutually-
acceptable approach.
FCC Hearing Aid Compatibility Your Treo is compliant with
the FCC Hearing Aid Compatibility (HAC) requirements. For
additional HAC information, including the HAC rating of this
product, please refer to www.palm.com/treoHAC
.
Static Electricity, ESD, and Your Palm
®
Device
Electrostatic discharge (ESD) can cause damage to electronic
devices if discharged into the device, so you should take steps to
avoid such an occurrence.
Description of ESD Static electricity is an electrical charge
caused by the buildup of excess electrons on the surface of a
material. To most people, static electricity and ESD are nothing
more than annoyances. For example, after walking over a carpet
while scuffing your feet, building up electrons on your body, you
may get a shock—the discharge event—when you touch a metal
doorknob. This little shock discharges the built-up static
electricity.
ESD-susceptible equipment Even a small amount of ESD can
harm circuitry, so when working with electronic devices, take
measures to help protect your electronic devices, including your
Palm
®
smartphone, from ESD harm. While Palm has built
protections against ESD into its products, ESD unfortunately
exists and, unless neutralized, could build up to levels that could
harm your equipment. Any electronic device that contains an
external entry point for plugging in anything from cables to
docking stations is susceptible to entry of ESD. Devices that you
carry with you, such as your smartphone, build up ESD in a
unique way because the static electricity that may have built up
on your body is automatically passed to the device. Then, when
the device is connected to another device such as a docking
station, a discharge event can occur.
Precautions against ESD Make sure to discharge any built-up
static electricity from yourself and your electronic devices before
touching an electronic device or connecting one device to
another. The recommendation from Palm is that you take this
precaution before connecting your smartphone to your
computer, placing the smartphone in a cradle, or connecting it to
any other device. You can do this in many ways, including the
following:
Ground yourself when you’re holding your mobile device by
simultaneously touching a metal surface that is at earth ground.
For example, if your computer has a metal case and is plugged
into a standard three-prong grounded outlet, touching the case
should discharge the ESD on your body.
Increase the relative humidity of your environment.
Install ESD-specific prevention items, such as grounding mats.
Conditions that enhance ESD occurrences Conditions that
can contribute to the buildup of static electricity in the
environment include the following:
Low relative humidity.
Material type. (The type of material gathering the charge. For
example, synthetics are more prone to static buildup than
natural fibers like cotton.)
The rapidity with which you touch, connect, or disconnect
electronic devices.
While you should always take appropriate precautions to
discharge static electricity, if you are in an environment where
you notice ESD events, you may want to take extra precautions
to protect your electronic equipment against ESD.