4 - 36
No. 99MBC095A
4.5.3.2 F1: Setting the measurement interval (measurement time)
Use this function to set the measurement interval. This measurement interval should be set
according to the arithmetical average and moving average, whichever is specified in the basic
setup.
1) Arithmetical average (Guidance: )
PROG
Step 1: The previously set number of scans for averaging
is displayed. Select between 1 and 2048 times .
The relationship between the number of scans for
averaging and measurement intervals are shown in
the table below.
Relationship between the number of scans for averaging and measurement intervals (mea-
surement times)
rofsnacsforebmuN
gnigareva
)emittnemerusaem(slavretnitnemerusaeM
egarevalacitemhtirAegarevagnivoM
tnemerusaemts1
tneuqesbusdnadn2
stnemerusaem
1ces23000.0 –
2ces46000.0 –
4ces3100.0 –
8ces5200.0 –
61ces500.0 –
23ces10.0ces10.0ces50.0
46ces20.0ces20.0ces50.0
821ces40.0ces40.0ces50.0
652ces80.0ces80.0ces50.0
215ces61.0ces61.0ces50.0
4201ces23.0ces23.0ces50.0
8402ces46.0ces46.0ces50.0
Each time the key is pressed, the setup option changes in the following order:
→ → → → → → → → → →
→ → . For this example select 1024 times.
PROG
Select 1024 times.
PROG
ENT
Step 2: Press the
ENT
key to save the setup data in
memory.
The operation automatically proceeds to F2:
Setting the GO/NG judgment criteria.
