4 - 51
No. 99MBC095A
4. SETTING UP THE MEASURING CONDITIONS
4.5.3.10 F8: Setting the group judgment
Set the conditions for the group judgment here.
Select between 0 and 99 for group size (0 and 1 are used for not performing group judg-
ment).
In this example assume that the group size is 5, and the objective statistical item is mean.
PROG
Step 1: The previously set group size is flashing.
5
PROG
Enter “5” as the group size.
PROG
Step 2: Press the
ENT
key.
If 0 or 1 is set for the group size in step 1 above,
the operation automatically proceeds to the
segment setting, which is the first stage of this
function setup. Otherwise proceeds to the statisti-
cal setting.
PROG
Step 3: Select the objective statistical item, Each time the
key is pressed, the setup option will change
in the following order: → →
→ . Since “mean” is to be set in this
example, no key input is necessary at this step.
PROG
Step 4: Press the
ENT
key.
The operation automatically proceeds to the group
lower limit setting.
PROG
Step 5: Set the group lower limit in the manner similar to
that of the lower limit setting. Press the
ENT
key
and the operation automatically proceeds to the
group upper limit setting.
PROG
Step 6: Set the group upper limit in the manner similar to
that of the upper limit setting. Press the
ENT
key
and the operation automatically proceeds to the
segment setting, which is the first stage of this
function setup.
