3 - 40
No. 99MBC095A
H.CAL
SET
SET
ENT
ENT
L.CAL
READ
SET
SET
READ
READ
H.CAL
L.CAL
SHIFT
Key name • In the ready state
• In the display-latched state
• At single-run measurement
• At continuous-run measurement
• At setup
• Combined use with power-on
• operation
• Enters the LOW CAL setup mode.
• Operation error
• This is used to enter the setup mode
• for the setup item that is being
• displayed in the upper section of the
• display unit.
• Enters the detection mode of the
• measurement position
• (focal position).
• Press or to restore the
• ready state.
• Enters the HIGH CAL setup mode.
• Operation error
• Operation error
• Operation error • Move left key
• Operation error • Operation error • Move right key
• Operation error • Operation error • Up key to increment the setup value.
• Operation error • Operation error • Down key to decrement the setup
• value.
• Operation error
• Operation error
• (Input of gage diameter) +
• executes LOW CAL.
• Press or in the
• LOW CAL setup mode to abort the
• setup operation and return to the
• ready state.
• Reads the measurement of the
• reference gage as the setup value.
• The read value can be modified with
•
the , , ,
•
and keys.
• If this entry is made when the
• function setup item number is
• flashing in the function setup mode,
• which was accessed by the
key, the setup operation for
• the light amount detection is entered.
• (Input of gage diameter) +
• executes HI CAL and illuminates
• the measurement state guidance ( )
• for CAL.
• Press or in the HI CAL
• setup mode to abort the setup
• operation and return to the ready
• state.
