Mitutoyo LSM-6200 Manual

A SERVICE OF

next previous

4 - 40

No. 99MBC095A

3) Setting the GO/NG judgment criteria (by multi-limit selection)

In this example assume the following:

L1=12.49mm

L2=12.494mm

L3=12.498mm

L4=12.502mm

L5=12.506mm

L6=12.51mm

PROG

.4

12

9

PROG

Step 1: The previously entered setup value for L1 is

displayed.

Enter “12.49”.

PROG

Step 2: Press the

ENT

key.

The setup data will be saved in memory and the

operation automatically proceeds to the L2 setting.

Step 3: Enter “12.494”, which is the setup data for L2.

4

.4

12

9

PROG

PROG

Step 4: Press the

ENT

key.

The setup data will be saved in memory and the

operation automatically proceeds to the L3 setting.

Step 5: As with L1 and L2, set L3, L4, and L5.

PROG

.5

12

1

PROG

Step 6: Enter “12.51”, which is the L6 setup value.

PROG

Step 7: Press the

ENT

key.

The setup data will be saved in memory and the

operation automatically proceeds to the reference

value setting.