Filter
Top Products
Manually Scan for a Wi-Fi Network
1. From the Home screen, tap ➔
Settings
➔
Wireless
and network
➔
Wi-Fi settings
.
2. Press
➔
Scan
.
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status at a
glance:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point
(WAP).
Displays when Wi-Fi is on but there is a
communication issue with the target Wireless
Access Point (WAP) or when Wi-Fi is on but your
device is not connected to a WAP.
Displays when connected to another device using
Wi-Fi Direct. For more information, refer to “Wi-Fi
Direct” on page 140.
Wi-Fi Advanced Settings
The Wi-Fi settings - Advanced menu allows you to set
up many of your device’s Wi-Fi service, including:
•
Setting your Wi-Fi sleep policy
•
Viewing your device’s MAC Address
•
Configuring use of either a DHCP or Static IP
To access the Bluetooth Settings menu:
1. From the Home screen, tap ➔
Settings
➔
Wireless
and network
➔
Wi-Fi settings
.
2. Press
➔
Advanced
.
For more information, refer to “Network Notification” on
page 103.
Wi-Fi Direct
Wi-Fi Direct allows device-to-device connections so you can
transfer large amounts of data over a Wi-Fi connection.
Note:
See your service plan for applicable charges for Wi-Fi
Direct.
1. From the Home screen, tap ➔
Settings
➔
Wireless and network
➔
Wi-Fi Direct settings
.
2. If you are currently connected to a Wi-Fi networ
k, a
prompt will display
Current network will be
disconnected
. Tap
OK
to continue.
3. Tap
Wi-Fi Direct
. A check mark is displayed indicating
that Wi-Fi Direct is active.
140