Filter
Top Products
Chapter 1 121
GPIB Command Dictionary
CDANalyzer subsystem
:FPOWer:NAVG <integer>
:FPOWer:NAVG?
These commands set/query the number of averages made by the fast
power measurement.
Syntax
CDAN:FPOW:NAVG <integer>
CDAN:FPOW:NAVG?
Screen/field equivalent
CDAN:FPOW:NAVG controls the Num Avgs field on the FP Setup menu
of the CODE DOM screen, when the CDMA standard is set to “IS-95
Only”.
:FPOWer:TOFFset <real number>
:FPOWer:TOFFset?
These commands set/query the time offset for the fast power
measurement. :FPOW:TOFF can be either entered with this command,
or it can be transferred via the :FPOW:TOFF:TRAN command.
This number can be entered in microseconds only.
Syntax
CDAN:FPOW:TOFF <real number> !0 to 26667
CDAN:FPOW:TOFF?
Screen/field equivalent
CDAN:FPOW:TOFF controls the Time Offset field on the FP Setup
menu of the CODE DOM screen, when the CDMA standard is set to
“IS-95 Only”.
:FPOWer:TOFFset:TRANsfer
This command transfers the measured time offset from the Tm Ofs
measurement field to the Time Offset field.
Syntax
CDAN:FPOW:TOFF:TRAN
Screen/field equivalent
CDAN:FPOW:TOFF:TRAN controls the Ofs Trnsfer field on the
FP Setup menu of the CODE DOM screen, when the CDMA standard is
set to “IS-95 Only”.