Filter
Top Products
172 Chapter 1
GPIB Command Dictionary
CONFigure subsystem
:SPOR9|SPORT9|SB9|SP9:MODem:CONFigure:STRing1
:SPOR9|SPORT9|SB9|SP9:MODem:CONFigure:STRing1?
:SPOR9|SPORT9|SB9|SP9:MODem:CONFigure:STRing2
:SPOR9|SPORT9|SB9|SP9:MODem:CONFigure:STRing2?
:SPOR9|SPORT9|SB9|SP9:MODem:CONFigure:STRing3
:SPOR9|SPORT9|SB9|SP9:MODem:CONFigure:STRing3?
These commands are used to enter the modem configuration strings to
be sent when the CONF:SPOR9:MOD:CONF:UPD command is
executed. Each string has a maximum of 40 characters.
STR 1 is the initial configuration string sent to the modem when the
CONF:SPOR9:MOD:CONF:UPD command is executed. The second line
is the second string sent, and the third line is the third string sent. The
second and third lines can be left blank.
Syntax
CONF:SPOR9:MOD:CONF:STR1 <string>
CONF:SPOR9:MOD:CONF:STR1?
CONF:SPOR9:MOD:CONF:STR2 <string>
CONF:SPOR9:MOD:CONF:STR2?
CONF:SPOR9:MOD:CONF:STR3 <string>
CONF:SPOR9:MOD:CONF:STR3?
Screen/field equivalent
CONF:SPOR9:MOD:CONF:STR1 controls the first line of the Modem
Initialization/Configuration field on the MODEM CONFIGURE
screen when the Serial Port field is set to Port 9.
:SPOR9|SPORT9|SB9|SP9:MODem:CONFigure:ECHaracter
:SPOR9|SPORT9|SB9|SP9:MODem:CONFigure:ECHaracter?
This command sets/queries a one-character, non-printable escape
character that you use to define your own escape command sequence.
Syntax
CONF:SPOR9:MOD:CONF:ECH <character>
CONF:SPOR9:MOD:CONF:ECH?
Screen/field equivalent
CONF:SPOR9:MOD:CONF:ECH controls the Command Escape
Character field on the MODEM CONFIGURE screen when the Serial
Port field is set to Port 9.