Filter
Top Products
Chapter 1 89
GPIB Command Dictionary
AFG2|ENCoder subsystem
:NAMPs|NTACs:BUSY:DELay <integer>
This command sets the number of bits that are counted before a
busy/idle bit changes form the idle state to the busy state. This function
is used in conjunction with the WS Delay and 1stBitDly settings of the
:NAMPs|NTACs:BUSY command.
This command utilizes only the :INCR command of the “Integer
Number Setting Syntax” on page 206.
Syntax
AFG2:NAMP:BUSY:DEL <real number>
Screen/field equivalent
AFG2:NAMP:BUSY:DEL controls the B/I Delay field on the
SIGNALING ENCODER screen when the Mode field is set to
NAMP-NTAC and the Channel field is set to Cntl.
:NAMPs|NTACs:CHANnel <string>
:NAMPs|NTACs:CHANnel?
These commands set/query the channel type. ‘Cntl’ selects the forward
control channel (FOCC). ‘Voice’ selects the forward voice channel (FVC).
Syntax
AFG2:NAMP:CHAN ‘Cntl’
‘Voice’
AFG2:NAMP:CHAN?
Screen/field equivalent
AFG2:NAMP:CHAN controls the Channel field on the SIGNALING
ENCODER screen when the Mode field is set to NAMP-NTAC.