Filter
Top Products
170 Chapter 1
GPIB Command Dictionary
CONFigure subsystem
:SPOR9|SPORT9|SB9|SP9:MODem:CONNect:TIMeout
:SPOR9|SPORT9|SB9|SP9:MODem:CONNect:TIMeout?
This command sets/queries the number of seconds to wait before
aborting a connection attempt. This applies to both answer and
originate activities.
Syntax
CONF:SPOR9:MOD:CONN:TIM <integer>
CONF:SPOR9:MOD:CONN:TIM?
Screen/field equivalent
CONF:SPOR9:MOD:CONN:TIM controls the Connection Time-out
field on the MODEM CONFIGURE screen when the Serial Port field
is set to Port 9.
:SPOR9|SPORT9|SB9|SP9:MODem:CONNect:HDELay
:SPOR9|SPORT9|SB9|SP9:MODem:CONNect:HDELay?
This command sets/queries the number of seconds to wait before
attempting an origination. This applies to the delay prior to attempting
a dialback as well as the delay prior to retrying an origination as part of
the retry sequence.
Syntax
CONF:SPOR9:MOD:CONN:HDEL <integer>
CONF:SPOR9:MOD:CONN:HDEL?
Screen/field equivalent
CONF:SPOR9:MOD:CONN:HDEL controls the Hold-off Delay field
on the MODEM CONFIGURE screen when the Serial Port field is set
to Port 9.