Filter
Top Products
Chapter 1 229
GPIB Command Dictionary
MEASure subsystem
:CDANalyzer:MARKer:LEVel <meas cmnd>
:CDANalyzer:MARKer:LEVel?
IS-95 Only mode. These commands set/query the level at the marker on
the code domain analyzer’s trace during power or fast power
measurements (see :CDAN:MEAS on page 124). This measurement is
made relative to the value at Walsh Code 0.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syntax
MEAS:CDAN:MARK:LEV <meas cmd>
!See “Number Measurement Syntax” on page 283.
MEAS:CDAN:MARK:LEV?
Example
MEAS:CDAN:MARK:LEV?
Screen/field equivalent
MEAS:CDAN:MARK:LEV? reads the Lvl field on the Marker menu of
the CODE DOM screen when a power or fast power measurement is
selected, and the Ch pwr unit field on the CD Setup menu is set to Rel.
This applies when the CDMA standard is set to “IS-95 Only”.