Filter
Top Products
284 Chapter 1
GPIB Command Dictionary
Number Measurement Syntax
:Previous Syntax:LLIMit:STATe 1|ON !sets state of the limit
:Previous Syntax:LLIMit:STATe 0|OFF !sets state of the limit
:Previous Syntax:LLIMit:STATe? !returns 1 or 0
:Previous Syntax:METer[:STATe] 1|ON
:Previous Syntax:METer[:STATe] 0|OFF
:Previous Syntax:METer[:STATe]? !returns 1 or 0
:Previous Syntax:METer:HEND|LEND <real value><units>
:Previous Syntax:METer:HEND|LEND? !returns real value
:Previous Syntax:METer:HEND|LEND:DUNits <units>
:Previous Syntax:METer:HEND|LEND:DUNits?
:Previous Syntax:METer:INTerval <integer value>
:Previous Syntax:METer:INTerval? !returns integer value
:Previous Syntax:REFerence[:VALue] <real_value>[<units>]
!sets the value of the reference for a measurement display
:Previous Syntax:REFerence? !returns the reference setting
:Previous Syntax:REFerence:DUNits <units> !display units
:Previous Syntax:REFerence:DUNits? !returns the display units
:Previous Syntax:REFerence:STATe 1|ON !sets state of the reference
:Previous Syntax:REFerence:STATe 0|OFF !sets state of the reference
:Previous Syntax:REFerence:STATe? !returns 1 or 0
:Previous Syntax:STATe 1|ON
:Previous Syntax:STATe 0|OFF
:Previous Syntax:STATe? ! returns 1 or 0
:Previous Syntax:UNits <GPIB unit_of_measure>
!sets the GPIB units
:Previous Syntax:UNits? !returns the GPIB units
Example 1-2 Examples
RFAN:FREQ 850.35MHz !sets the frequency to 850.35 MHz
RFAN:FREQ? !returns the frequency
RFAN:FREQ:DUNits GHz !changes the units to GigaHertz
RFAN:FREQ:INCR 3.5MHz !increments frequency by 3.5 MHz
RFAN:FREQ:INCR? !returns the increment value
RFAN:FREQ:MULT !multiplies the current frequency by 10
RFAN:FREQ:MULT !multiplies the current frequency by 10
!Note that :STAT is not valid for RFAN:FREQ