Filter
Top Products
134 Chapter 1
GPIB Command Dictionary
CDANalyzer subsystem
:IS2000:GAIN:VALue?
IS-2000 only. This query returns the gain value, as a string, that is
shown in the gain field of the code domain screen. This command will
only be enabled when autoranging is turned on
(CDAN:IS2000:GAIN:MODE ‘Auto’).
Syntax
CDAN:IS2000:GAIN:VAL? !returns 0 dB, 6 dB, 12 dB, 18 dB,
24 dB, 30 db, 36 dB
Screen/field equivalent
CDAN:IS2000:GAIN:VAL? reads the lower subfield of the Gain image of
the CODE DOMAIN screen when the CDMA standard is set to
“IS-2000” and the upper field is set to Auto.
:IS2000:MARKer:MODE <string>
:IS2000:MARKer:MODE?
IS-2000 only. These commands set/query the string that matches the
field contents of the field that selects the way channel width
information is presented: In terms of Channel size or Walsh order.
Syntax
CDAN:IS2000:MARK:MODE <string>
CDAN:IS2000:MARK:MODE?
Screen/field equivalent
CDAN:IS2000:MARK:MODE? reads the selection field Chan
Size/Walsh Ord/Sprd Fact/Rate RC-3/Rate RC-4/Rate RC-5 in
the measurement portion of the CODE DOMAIN screen when the
CDMA standard is set to “IS-2000”.