Filter
Top Products
Chapter 1 219
GPIB Command Dictionary
MEASure subsystem
:CANalyzer:ADC:TPOWeradc:LEVel <meas cmnd>
:CANalyzer:ADC:TPOWeradc:LEVel?
These commands set/query the ADC for the channel power
measurement. The ADC is a measure of how close the actual input
signal is to the maximum input level.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syntax
MEAS:CAN:ADC:TPOW:LEV <meas cmd>
!See “Number Measurement Syntax” on page 283.
MEAS:CAN:ADC:TPOW:LEV?
Example
MEAS:CAN:ADC:TPOW:LEV? !displays the measurement
Screen/field equivalent
MEAS:CAN:ADC:TPOW:LEV? reads the ADC FS measurement field on
the CDMA ANALYZER screen. This measurement is also displayed on
the CDMA GENERATOR screen.
:CANalyzer:CARrier:FEEDthrough <meas cmnd>
:CANalyzer:CARrier:FEEDthrough?
These commands set/query the carrier feedthrough measurement.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syntax
MEAS:CAN:CAR:FEED <meas cmd>
!See “Number Measurement Syntax” on page 283.
MEAS:CAN:CAR:FEED? !returns the level
Example
MEAS:CAN:CAR:FEED?
Screen/field equivalent
MEAS:CAN:CAR:FEED? reads the Carrier Feedthru measurement
field on the CDMA ANALYZER screen. This measurement is also
displayed on the CDMA GENERATOR screen.