Filter
Top Products
228 Chapter 1
GPIB Command Dictionary
MEASure subsystem
:CDANalyzer:ERHo?
IS-95 Only mode. This command queries the estimated rho
measurement. Estimated rho is an approximation of rho that is
calculated without taking the system out of service.
Syntax
MEAS:CDAN:ERH?
Screen/field equivalent
MEAS:CDAN:ERH? queries the Est Rho field CODE DOM screen
when the CDMA standard is set to “IS-95 Only”.
:CDANalyzer:MARKer:APOWer <meas cmnd>
:CDANalyzer:MARKer:APOWer?
IS-95 Only mode. These commands set/query the absolute power
measurement.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syntax
MEAS:CDAN:MARK:APOW <meas cmd>
!See “Number Measurement Syntax” on page 283.
MEAS:CDAN:MARK:APOW?
Example
MEAS:CDAN:MARK:APOW?
Screen/field equivalent
MEAS:CDAN:MARK:APOW? reads the Lvl field on the Marker menu
of the CODE DOM screen when power (or fast power) measurement is
selected and the Ch pwr unit field on the CD Setup menu is set to Abs.
This applies when the CDMA standard is set to “IS-95 Only”.