Filter
Top Products
72 Chapter 1
GPIB Command Dictionary
AFG2|ENCoder subsystem
:OUTPut <real number>
:OUTPut?
This command sets the amplitude of the audio signal (volts rms) at the
AUDIO OUT connector if the AFG2:DEST is ‘Audio Out’.
This command utilizes the “Real Number Setting Syntax” on page 299.
Syntax
AFG2:OUTP <real number>
AFG2:OUTP?
Screen/field equivalent
AFG2:OUT controls the AFGen2 To field (lower subfield) on the RF
GENERATOR screen when the upper subfield is set to Audio Out.
:PEMPhasis <string>
:PEMPhasis?
This command sets pre-emphasis filters for the DTMF encoder.
Syntax
AFG2:PEMP ‘On’
‘Off’
AFG2:PEMP?
Screen/field equivalent
AFG2:PEMP controls the Pre-Emp field on the SIGNALING ENCODER
screen when the Mode field is set to DTMF.